User's Manual
Security: RADIUS timeout too short
Installation and User Guide: Airgo Access Point 301
D
escr
i
p
ti
on
This notification is sent during authentication, when the RADIUS server sends a bad response.
The aniNotifCauseCode identifies the reason associated with this bad response.
U
sage
G
u
id
e
li
nes
This indicates that the AP has determined that a RADIUS server has sent a bad or unexpected
response. The response could be bad because the cryptographic signature check might have
failed or because an attribute might be missing or badly encoded.
E
xamp
l
es
For device-id AP_00-0A-F5-00-01-89 , the RADIUS server 192.168.75.230:1812
sent back a bad response due to 7
S
ee
Al
so
Security: RADIUS timeout too short
Notification that indicates the AP has determined that a RADIUS server has sent a late response.
This indicates that the AP RADIUS timeout might need to be increased
S
yntax
"For device-id %s, the RADIUS server %s:%d sent a late response - you might
need to increase your RADIUS timeout of %d seconds"
D
escr
i
p
ti
on
This notification is generated when the AP receives a late response from the RADIUS server,
as opposed to not receiving any response at all. The AP may have attempted multiple retries or
may have switched to another RADIUS server by this time. This indicates that due to higher
latencies in the network, it might be better to increase the timeout associated with the
authentication server.
U
sage
G
u
id
e
li
nes
This indicates that the AP has determined that a RADIUS server has sent a late response.
Alarm Parameters
DeviceId The device ID of the AP
RADIUS server The IP address of the RADIUS server
Port The port used to communicate with the RADIUS server
RADIUS timeout The current setting of the RADIUS timeout
Alarm Severity
Severity Critical