User's Manual

Setting the Advanced Radio Configuration
Installation and User Guide: Airgo Access Point 75
Click Apply to save changes or Reset to return to previously saved values.
IEEE 802.11 Extensions Enable 802.11 Standard Extensions to turn on support for 802.11e-h-i-g
modes. Select 802.11 Enhanced Extensions to support higher data rates
between the AP and compatible stations. If the Enhanced option is selected,
then it is possible to enable the following through the command line interface
(they are not automatically enabled).
• Enhanced rate set (specific flag needs to be set).
• Proprietary burst ack. This is a proprietary acknowledgement mode that
increases peak throughput in environments where Airgo True MIMO data
rates are reliably sustained.
• Advanced rate adaptation.
• Wireless backhaul AP name in beacon (if not enabled, the AP name in
beacon is suppressed).
802.11G Protection Select to enable 802.11g protection mode, short slot time, and short preamble
if the radio is operating in 802.11g mode.
If the checkbox is selected, all three aspects are enabled; if not, all three
aspects are disabled. The default setting is Disabled.
Select Basic Rate Set Enter basic data rates for the different 802.11 modes. To set rates, select Set
and enter the rates with a space as the delimiter. The basic 802.11 rates are
advertised in beacons and inform the client stations of the minimum set of
rates it must support to be part of the BSS. 802.11 control frames such as
ACKS, CTS, and RTS are transmitted at basic rates.
Feature (continued) Description