User's Manual

4 Configuring Radio Settings
74 Installation and User Guide: Airgo Access Point
Setting the Advanced Radio Configuration
Select Advanced Configuration from the Wireless Services menu to open the Advanced
Configuration feature panel. The panel contains the following tabs:
• 802.11 Policy — Set the 802.11 modes for the AP radios.
• MAC Configuration —Set details of the radio beacon and MAC configuration for each radio.
To configure settings on these tabs, select each in sequence, or step through the tabs using the Go
links at the bottom of the panel.
802.11 Policy
Use the 802.11 tab (Figure 47) to set the 802.11 modes and data rates for each AP radio.
Figure 47: Advanced Configuration - 802.11 Policy
Set the following values on this panel:
Feature Description
Select Radio Interface Select the AP radio (wlan0 or wlan1).
IEEE 802.11 Mode in
2.4 Band
Select whether the radio is configured for 802.11b or 802.11g operation when
it operates in the 2.4GHz band.