User's Manual

4 Configuring Radio Settings
68 Installation and User Guide: Airgo Access Point
Channel Configuration
Use the Channel Configuration tab (Figure 44) to define rules for selecting radio channels. If two
radios are installed in the same AP, each radio operates in a different band (2.4GHz for one radio
and 5GHz for the other).
Figure 44: Radio Configuration - Channel Config
Set the following values in the Radio Interface Selection and Channel Configuration areas of the
tab:
Feature Description
Select Radio Interface Select the AP radio (wlan0 or wlan1).
Channel Number Select a valid channel for radio operation, or accept the Automatic Channel
Selection option.