User's Manual

3 Installing the Access Point Using the Configuration Interfaces
46 Installation and User Guide: Airgo Access Point
Portal Config Tab
Use the Portal Config tab (Figure 29) to enable portal services on this AP. See “Portal
Architecture” on page 4 for a description of the portal services.
Figure 29: AP Quick Start - Bootstrap Configuration - Portal Config
Admin Email Tab
If the AP is configured as a portal AP, use the Admin Email tab (Figure 30) to specify how to alert
the network administrator regarding critical faults or security breaches. Configure the following
fields:
Figure 30: AP Quick Start - Bootstrap Configuration - Admin Email
Field Description
SMTP Server Address Enter the IP address of the SMTP server used to reach the network
administrator.
Admin E-mail Address Enter the email address of the network administrator.
[e-mail]