User's Manual
Navigating the Web Interface
Installation and User Guide: Airgo Access Point 45
Clock Config Tab
Use the Clock Config tab (Figure 28) to set time parameters for the bootstrap configuration.
Figure 28: AP Quick Start - Bootstrap Configuration - Clock Config
This tab contains the following settings:
Field Description
Date Current date in MM/DD/YYYY format
Time Current time in HH:MM:SS format (hours 0-23)
Time Zone US-zone or GMT option. For US zone, click the radio button and select a
time zone. For GMT, click the radio button and select an offset in HH:MM
format.
Synchronize Clock Indicate whether time will be synchronized manually through the date and
time fields, or by way of an NTP server. If you select the server option, enter
the IP address of the server in the space provided. If an NTP server is
currently assigned, the address of the server is displayed, as shown in
Figure 28 under the heading Current NTP Servers.
Multiple NTP servers may be specified (space separated). If more than one
server is specified, they are contacted in the order given. If the Synchronize
Clock is empty, then all manually configured NTP servers will be deleted.
If the AP is configured to receive an IP address via DHCP, then the DHCP
server could also return the set of NTP servers. In such a scenario, the
manually configured NTP servers take precedence over the DHCP returned
NTP servers.
If you delete NTP servers, only those added manually are deleted. DHCP-
assigned NTP servers continue to be available.