User's Manual

3 Installing the Access Point Using the Configuration Interfaces
42 Installation and User Guide: Airgo Access Point
Quick Start Panels
Use the AP Quick Start menu items to open the Bootstrap Configuration and Version panels. Each
of the tabs in the Bootstrap Configuration panel corresponds to one of the screens used to initialize
an AP in AP Quick Start.
IP Config Tab
The IP Config tab opens when you choose Bootstrap Configuration from the AP Quick Start menu
(Figure 26). Use this tab to configure the management Address of the AP
.
Figure 26: AP Quick Start - Bootstrap Configuration - IP Config
This tab contains the following settings:
NOTE: Changing this address will also change the IP address of the management
VLAN on the AP.
Field Description
DHCP Assigned IP
Address
Indicate whether to use DHCP to obtain an IP address for the AP. If the box is
cleared, the other Management IP Configuration fields are activated; if the
box is selected, the other Management IP Configuration fields are inactive.
NOTE: If the web interface is reconfigured with a static IP address, you must
explicitly log back in using the new IP address.
APs.