User's Manual

Navigating the Web Interface
Installation and User Guide: Airgo Access Point 39
Figure 22: Portal QuickStart panel
7 Enter the following information consistent with your corporate standards:
8 Click Finish to complete the initialization process and bring up the AP Explorer Home panel.
The process takes approximately two minutes. When the process is complete, the Home panel
opens.
Navigating the Web Interface
The Airgo AP web interface is divided into three main areas. The menu tree (Figure 23) provides
access to all the panels and features of the web interface. To expand a menu in the menu tree, click
the arrow to the left of the menu name.
Field Description
Admin Password Enter and confirm the password used to manage this AP and other enrolled
APs. The password must be between 8 and 32 characters and is used for local
administrator login and SNMP v3 login. (required)
SMTP Server Name or
IP Address
Address of your SMTP server
Administrator Email
Address
Email address of the person to be notified regarding alerts
NOTE: After the AP has been configured, there are two potential authentication paths
for the administrative user login. If the username is admin, then the password is first
checked against the local database. If the local login fails, or if the username is not
admin, then the password is compared with the password stored in any configured
RADIUS servers. The local admin password is the same as the SNMPv3 password.