User's Manual

3 Installing the Access Point Using the Configuration Interfaces
36 Installation and User Guide: Airgo Access Point
2 Click Next to continue to the next panel (Figure 20). Use this panel to configure network
identity.
Figure 20: QuickStart Network Identity
3 Configure the following information on this panel:
IP Address/Maskbits Static IP address and subnet prefix for the AP. Required if the IP address is
not obtained automatically. The default is 192.168.1.254/24.
NOTE: It is required that each NM Portal have a static IP address.
Default Gateway IP address of the gateway to the wired network. Required for complete
network access, if the IP address is not obtained automatically. The default is
the existing network gateway.
Domain Name Servers IP address of the server supplying DNS service. Required for complete
network access, if the IP address is not obtained automatically. The default is
the DNS server for the existing network.
Date Current date in MM/DD/YYYY format
Time Current time in HH:MM:SS format (hours 0-23)
Time Zone US zone or GMT option. For US zone, click the radio button and select a time
zone. For GMT, click the radio button and select an offset in HH:MM format.
Field Description
SSID Name Service set identifier for the network, also known as the Wireless Network
Name. The default name must be changed. (required)
Field Description