User's Manual

Sample Deployment Scenarios
Installation and User Guide: Airgo Access Point 19
Table 4: Example 2 Configuration Tasks
Task Explanation
Enroll APs 1 Connect the additional AP to the wired network.
2 Enroll the AP to support wireless backhaul
Reference: “Enrolling APs” on page 181
Distribute policies to
other APs
1 Generate the default policy based on the configuration of the NM Portal
AP.
2 Distribute the policy to the other AP(s) in the network.
Reference: “Working with Policies” on page 197
Distribute configuration
updates
1 Make any configuration changes in the NM Portal AP.
2 Regenerate the default policy and redistribute to the enrolled AP(s).
Reference: “Working with Policies” on page 197
Install wireless backhaul
AP
1 Disconnect the wireless backhaul AP from the wired network.
2 Place the AP where needed, within radio range of the wired AP.