User's Manual

Features Overview
Installation and User Guide: Airgo Access Point 3
• Security - Financial Grade Security
• Four-layers of security: AP security, Admin User Security, Wireless User Security, and
Guest User security support
— AP Security with a built-in unique X.509 AP certificate for constructing a secure
wireless network.
— Admin User Security with management access through SSH, HTTPs and SNMPv3.
— Wireless User Security supports IEEE 802.1X security with WPA-PSK, WPA-EAP,
WEP-64, WEP-128, EAP-TLS, EAP-PEAP, EAP-TTLS, MAC-ACL, Guest
Authentication and Open authentication
— Guest User Security with secure web browser based security
• Wire-speed AES-CCM encryption (supported in hardware)
• Rogue AP detection and monitoring to protect against unauthorized wireless networks
• Wireless Services - Self-Healing and High-Performance Wireless Access
• Each radio is dual-band and multi-mode with 802.11a, b or g operations.
• Dynamic channel assignment
• Support for low, medium or high network density for varying cell size
• World-mode support for compliance for channel and transmit-power constraints in different
countries
• Multiple SSID with Virtual AP feature set
• WMM QOS, or IEEE 802.11e QOS support
• Wireless backhaul to extend secure wireless network without need to wire every access-point
to Ethernet backbone.
• Layer-2 and Layer-3 Mobility - Seamless Mobility
• Supports seamless Layer-2 or intra-IP subnet roaming using IAPP
• Supports seamless Layer-3 or inter-IP subnet roaming using VLANs or Tunneling methods
• Zero-Configuration - Rapid Secure Network Deployment
• Built-in network management and security portal services to enable centralized
configuration, security and management of wireless network.
• Built-in RADIUS server to provide WPA-EAP with certificate based security for wireless
users
• Support RADIUS-proxy to simplify configuration of external RADIUS servers
• Support for legacy station authentication using MAC-address based Access Control List
(ACL).
• Support for password-based Guest-Access authentication
• Policy based configuration of network from NM-Portal AP
• One click software distribution to entire network from NM-Portal AP
• Configuration backup and restore
• Centralized fault-monitoring using Alarms and SYSLOG
• Configuration using CLI, SNMP and Web User-Interface
• Networking - High Performance QOS & VLAN Support
• High-performance bridging, VLANs and static IP routing support
• Extensive QOS support using WMM, IP DSCP, IP Precedence, and IP Protocol with ingress
and egress QOS rules
• Layer-2 Filtering on ingress and egress interfaces.