User's Manual

7 Managing Security
156 Installation and User Guide: Airgo Access Point
Figure 110: Authentication Zones - Add Auth Zones
To add a new authentication server, click Add Auth-Server, and enter the following values for
each new RADIUS server:
Click Add to save the values, or click Reset to clear the fields on the panel.
Click Back on your browser to return to the Auth Zone panel. Set an authentication zone for
administrative users by selecting from the pull-down list.
Authentication Servers
Open the Authentication Servers tab (Figure 111) to view the current authentication servers and
add or delete servers. This table shows the list of internal authentication servers (security portals)
and external authentication servers. The servers that do not have an associated check box are
security portals.
Figure 111: Authentication Zones - Auth Servers
Field Description
Auth Server IP address of the RADIUS authentication server
Shared Secret Secret key to be entered and confirmed
Port Number Port number for the server (default is 1812)