User's Manual

7 Managing Security
150 Installation and User Guide: Airgo Access Point
Figure 106: Zone Privacy - using a Management VLAN
Configuring Wireless Security
Choose Wireless Security from the Security Services menu to configure the protocols for data
encryption and user authentication. The Wireless Security panel contains two tabs:
• Security Mode — Configure WPA, WEP, or open encryption and authentication.
• SSID Auth — Configure security settings for the SSID.
Security Mode
Use the Security Mode tab (Figure 107) to assign the encryption and authentication methods,
including WPA, WEP, or Open. Allowing multiple encryption modes can be useful to support
installations with a mixture of client wireless adapters. The allowed combinations have some
limitations; it is not possible to enable both WEP and Open simultaneously. Also, Open and WPA
encryption modes require each mode to be mapped to a separate VLAN (see “Configuring VLANs”
on page 111).
“root” AP
Management VLAN
Non-management VLAN