User's Manual

Configuring Interfaces
Installation and User Guide: Airgo Access Point 129
Interface Table
Choose Interface from the Networking Services menu to open the Interface Table (Figure 92). Use
this tab to assign an IP address to each interface, thereby making it possible to route traffic to the
interface. Without an assigned IP address, traffic can only be bridged to the interface, not routed.
Figure 92: Interface Configuration - IF Table
The Interface table lists each interface along with its IP address, Enable or Disable flag, and
indication of whether the interface is currently operational. Modify the properties of the IP address
assigned to an interface by selecting the interface entry and clicking Enable, Disable, or Delete IP.
To assign an IP address to an interface, enter the following values under IP Address Configuration,
and click Apply:
Field Description
Interface Name Select the AP interface name from the pull-down list.
IP Address Enter the IP address to assign to the interface. (required)
Maskbits Enter the subnet prefix length for the IP address. (required)