User's Manual

Configuring Advanced QoS
Installation and User Guide: Airgo Access Point 125
Click Apply to save all the changes on the tab.
IP Protocol
Use the IP Protocol tab (Figure 87) to base the COS mapping on IP protocol numbers, as defined in
Version 4 of the IP protocol. Current protocol number assignments are available at http://
www.iana.org/numbers.html.
Figure 87: Advanced QoS Configuration - IP Protocol
Configure the following fields:
Click Apply to save all the changes on the tab.
DSCP String If Default is not chosen, enter up to eight DSCP values that you want to map
to a specific COS value.
COS Select the COS value.
Field Description
Select Interface Select the AP interface.
IP Protocol ID Enter the number assigned to the IP protocol.
COS Select the COS value.
Field Description