User's Manual

Configuring Advanced QoS
Installation and User Guide: Airgo Access Point 123
Click Apply to save all the changes on the tab.
IP DSCP
Use the IP DSCP tab (Figure 86) to map DiffServ Code point (DSCP) values to COS and to view the
current DSCP-to-COS maps. DSCP uses the first 6 bits in the ToS byte of the IP header, so the possible
values range from 0 to 63.
Current Ingress Class
Order
Displays the current setting for class order.
Ingress Class Order -
Default
Select to use the default mapping.
Ingress Class Order -
Move to Top
If the default order is not chosen, select the class that you want to have at the
top of thc class order list, and click Add. This adds the class to the Selected
Classes list. Continue adding classes in the order you want them to be applied.
When you have finished, click Apply. The class order is saved and listed in
the Current Ingress Class Order field.
Field Description