User's Manual

5 Configuring Networking Settings
106 Installation and User Guide: Airgo Access Point
Figure 70: Airgo Networks Wireless Network Elements
Configuring Bridging Services
Use the Bridging panel, accessible from the Networking Services menu, to view the relationships
among bridges, interfaces, and client stations. The panel contains the following tabs:
• Bridge & STP — View bridges, their interface members, and spanning tree protocol (STP)
settings.
• Bridge Stats — View packet counts for each bridge.
• ARP Table — View the ARP cache.
Bridge and STP
Choose Bridging from the Networking Services menu to open the Bridge & STP tab (Figure 71),
The tab displays how bridging is currently configured and lists the interfaces and MAC addresses
Table 11: AP Interfaces
Interface Description
eth0 Wired Ethernet interface
wlan0 Wireless interface, radio 0
wlan1 Wireless interface, radio 1
wlan0.tkx Backhaul x created on wlan0 (each radio can support multiple backhauls)
wlan1.tkx Backhaul x created on wlan1 (each radio can support multiple backhauls)
Enterprise Boundry
NMS
RADIUS
10/100 Ethernet
Corporate
Network
Internet
LAN Switch/Router
WAN Router
with Firewall
Network Operations Center
AP with
2 Radios
AP with
1 Radio
AP with
1 Radio
802.11a
802.11g/b
802.11a
(or 802.11g/b)
802.11g/b
(or 802.11a)
A0008C