User's Manual

Configuring Inter Access Point Protocol (IAPP)
Installation and User Guide: Airgo Access Point 95
Figure 62: Station Security Statistics
Select a station from the Station Associations table and click Security Stat to display the following
information:
Configuring Inter Access Point Protocol (IAPP)
Inter-Access Point Protocol enables neighboring access points to keep up-to-date information
concerning the status of roaming client stations. Select IAPP Configuration from the Wireless
Services menu to configure the IAPP settings and to view the associated topology and statistics.
Field Description
Station MAC The MAC address that identifies the client station
MAC Address MAC address of the AP
Auth Type Authentication used by station (Open, Shared key, EAP, or MAC-ACL)
Encryption Encryption used by station (AES, TKIP, WEP, or open access)
AES Transmitted
Blocks
Number of AES transmitted blocks (valid only if encryption is AES)
AES Received Blocks Number of AES received blocks (valid only if encryption is AES)
AES Replays Number of AES replays (valid only if encryption is AES)
AES Decrypt Errors Number of AES decryption errors (valid only if encryption is AES)
WEP Excluded Count Number of WEP exclude packets (valid only if encryption is WEP)
WEP Undecryptable
Count
Number of frames received that are NOT encrypted (and thus are not
decryptable)