User's Manual

Managing Client Stations
Installation and User Guide: Airgo Access Point 91
Use the Multiple SSID tab (Figure 59) to enable the multiple SSID feature. Make a selection, and
click Apply. After enabling the multiple SSID feature, additional SSIDs can be added on the SSID
Table (see “SSID Table” on page 85).
When multiple SSIDs are enabled on the Airgo AP, that AP no longer broadcasts an SSID in its
beacon frame. In order for a client to associate with the Airgo AP configured for multiple SSIDs, a
profile for each target SSID must be created on the client workstation using the Windows Zero
Config (WZC) Add function or the Airgo Wireless Client Utility Create function.
Figure 59: SSID Configuration - Multiple SSID
Managing Client Stations
Select Station Management from the Wireless Services menu to open the Station Associations
panel. The panel contains the following tabs:
• Stations — View all client stations associated to this Airgo AP.
• Link Stat — View signal strength, signal quality, and all the MAC level statistics.
• Security Stat — View 802.1x security statistics.