User's Manual

Configuring SSID Parameters
Installation and User Guide: Airgo Access Point 87
SSID Details
Use the SSID Details Tab (Figure 55) to modify an SSID and bind service profiles to an SSID.
Figure 55: SSID Configuration - SSID Details
The tab contains two areas. Use the Modify SSID Configuration area to change the current SSID
configuration, as described in “SSID Table” on page 85. The bottom area shows the service profiles
currently bound to the SSID. This list includes the following information for each service profile:
Feature Description
User Group The user group that is linked to the service profile; if this entry is empty, the
user group is null. The null user group is automatically assigned to the default
service profile, unless it is explicitly bound to another service profile.
RADIUS authentication must be active in order for user groups to be
effective. The user group for a given client is passed to the AP as a RADIUS
attribute for each successfully authenticated user. If all the service profiles
associated with an SSID are deleted, then the SSID is automatically associated
to the Default service profile.
If the group must be changed then the SSID to service profile binding must be
deleted and re-added.
Profile Service profile name.
VLAN VLAN assigned to the service profile.