User's Manual

1 InstallationOverview
4 Installation and User Guide: Wireless LAN Client Adapter
Installing the Wireless LAN Client Adapter Driver and Client Utility
Follow the steps in this section to install the software needed to support your Wireless LAN Client
Adapter. The software includes:
• Wireless LAN Client Adapter driver
• Client Utility
Installation Steps
1 If you are using the PCI card, make sure that it is physically installed (page 3). If you are using
the PC card, slide it into the CardBus slot on your computer.
2 Power up your computer.
3 Insert the Wireless LAN Client Adapter distribution CD.
The CD menu opens.
4 Currently, both the Network Card Drivers and Client Utility are selected and this selection
cannot be modified. Click Install Software and the Installation Wizard opens.
NOTE: Before installing the Wireless LAN Client Adapter or any other wireless
adapter, you must make sure that your system has the latest Microsoft patches to
support wireless networking. You can find information and patches at
http://www.microsoft.com/hardware/broadbandnetworking/
10_concept_wireless_security.mspx.
NOTE: If the Microsoft Found New Hardware Wizard opens, click Cancel to close the
wizard.