User's Manual

Connecting the Airgo Wireless LAN Client Adapter
Installation and User Guide: Airgo Wireless LAN Client Adapter 3
To install the PCI card adapter (Figure 2):
1 Power down your PC.
2 Remove the cover that provides access to the PCI expansion slot.
3 Insert the PCI card into an available PCI slot.
4 Replace the cover.
5 Attach the antenna to the external connector on the PCI card.
You are now ready to install the Airgo Wireless LAN Client Adapter driver software.
Figure 2: PCI Card Installation
Checking Adapter Activity
The LEDs on the PC card and PCI card indicate the state of current communications:
• Solid green — The adapter is associated (connected) to the network.
• Slow blinking green — The adapter is not associated to the network.
• Fast blinking green — The adapter is transmitting or receiving data.