User's Manual

1 Installation
2 Installation and User Guide: Airgo Wireless LAN Client Adapter
• CPU 1.0 GHz or greater
• At least 10 MB disk capacity available for the driver and Airgo Client Utility software.
• Type II or Type III cardbus slot for notebooks and laptops
Connecting the Airgo Wireless LAN Client Adapter
To install the PC card:
• With the computer powered on or off, slide the PC card firmly into an available CardBus slot
(Figure 1).
Figure 1: PC Card Installation
To safely remove the PC card while the computer is powered up:
1 Right-click the system tray icon entitled Safely Remove Hardware or Eject or Stop
Hardware.
The system prompts you to select the device to stop.
2 Select Airgo Wireless LAN NIC, and click Stop.
3 Click OK when asked to confirm.
4 Press the CardBus eject button on the side of your computer to release the slot locking
mechanism and slide the PC card out.
LB48016