User's Manual

Installation and User Guide: Airgo Wireless LAN Client Adapter 29
A
Individual Driver and Client
Utility Installation Procedures
Chapter 1, “Installation,” explains how to install the Airgo Wireless LAN Client Adapter driver and
Airgo Client Utility by way of a unified installation process. This appendix explains how to install
the driver and the Airgo Client Utility separately. This information may be useful for
troubleshooting and installing upgrades.
Installing the Airgo Wireless LAN Client Adapter Driver
Follow the steps in this section to install the driver software for the Airgo Wireless LAN Client
Adapter, which enables the operating system on your computer to interact with the adapter. The
instructions vary slightly according to the operating system running on your computer.
Windows XP Instructions
1 If you are using the PCI card, make sure that it is physically installed in your computer (see
“Connecting the Airgo Wireless LAN Client Adapter” on page 2). If you are using the PC card,
slide it into the CardBus slot on your computer.
2 Power up the computer.
The Found New Hardware wizard opens and prompts you to insert the installation CD into
your computer.