User's Manual

1 Installation
4 Installation and User Guide: Airgo Wireless LAN Client Adapter
Installing the Airgo Wireless LAN Client Adapter Driver and Airgo Client
Utility
Follow the steps in this section to install the software needed to support your Airgo Wireless LAN
Client Adapter. The software includes:
• Airgo Wireless LAN Client Adapter driver
• Airgo Client Utility
Installation Steps
1 If you are using the PCI card, make sure that it is physically installed (page 3). If you are using
the PC card, slide it into the CardBus slot on your computer.
2 Power up your computer.
3 Insert the Airgo Wireless LAN Client Adapter distribution CD.
The Airgo CD menu opens.
4 Currently, both the Network Card Drivers and Client Utility are selected and this selection
cannot be modified. Click Install Software and the Installation Wizard opens.
NOTE: Before installing the Airgo Wireless LAN Client Adapter or any other wireless
adapter, you must make sure that your system has the latest Microsoft patches to
support wireless networking. You can find information and patches at
http://www.microsoft.com/hardware/broadbandnetworking/
10_concept_wireless_security.mspx.
NOTE: If the Microsoft Found New Hardware Wizard opens, click Cancel to close the
wizard.