User's Manual
Table Of Contents
Signal
quality
Signal strength, as a percentage: All red hollow bars, less than
5%
Security Open security
Security WEP security
Security WPA security
Channel
Current radio channel used for communications between the
Client Adapter and the access point
Type
Infrastructure
Ad-hoc network
QoS
Applicable wireless quality of service (QoS) settings for Wi-Fi
multimedia (WMM) and 802.11e QoS
Perform any of the following operations on the Available Networks list:
Item Description
Re-Scan
Causes the Client Adapter software to immediately scan for all the
wireless networks within radio range. Detected networks are presented in
the Available Networks list. Background scanning for available networks
occurs by default every five seconds.
Configure Open the Profile Editor window (See Profile Tasks).
Resize
columns
Select and move the column header dividers.
Sort entries
by column
Click the column header. The arrow that appears indicates the sort order
(upward facing for ascending and downward facing for descending). To
change the sort order, click the column header again.
Add or
remove
columns
Right-click on the column header, and select or deselect columns.
Reorder
columns
Drag the column headers to reorder the columns.
Properties
Displays network details. Select one or more networks and click
Properties to open the Properties window. See Properties Window
Information lists the information shown in the Properties window. All
APs for the selected networks are displayed.
Properties Window Information
Item Description
BSSID IDs of the APs belonging to the selected SSIDs
SSID ID of the selected networks
Page 18 of 36 Installation and User Guide: Wireless LAN Client