User's Manual

Security Security mode (WEP, WPA, or open)
Supported
Rates
All data rates supported by the access point
Basic Rates Minimum data rates supported by the access point
Channel
Radio channel used for communication between the Client Adapter and
access point
Mode 802.11 mode (b or g)
Type Network type (Infrastructure or Ad-hoc)
Country Code
International Standards Organization (ISO) standards for frequency
selection based on country-specific regulations
1
Environment Type of physical environment (Indoor, Outdoor or Both)
Channel List Available operating channels
True MIMO Use of enhanced, True MIMO, data rates (Yes or No)
Signal
strength
Strength of the radio signal, as a percentage
Configured Networks List
The Configured Networks list shows all the networks for which a network profile is
defined. For information on using profiles, see Working with Profiles. The Configured
Networks list includes the following information:
Item Description
SSID Name of the network
Signal quality Quality of the radio signal
Security Type of active security
Type Infrastructure or ad-hoc network
Perform any of the following operations on the Configured Networks
list:
Item Description
Add Click Add to open the Profile Editor to create a new profile.
Remove Click Remove to eliminate a network from the Configured Networks list.
Edit Click Edit to edit the selected network using the Profile Editor.
Change
network
order
Highlight an entry and use the arrows to the right of the list to move the
entry up or down.
1
Client adapters will be channel restricted based on country code programmed in the
adapters EEPROM.
Installation and User Guide: Wireless LAN Client Page 19 of 36