Operation Manual

NOTICE: READ THIS MANUAL ENTIRELY BEFORE
CHARGING OR USING YOUR AIRGUN

WARNING: Make sure air rie is unloaded before installing air
tank.
Figure 1
Figure 2
Slide the air tank into
the rear of the frame.
See FIGURE 1.
Screw the Spin-Loc
Sleeve onto the air tank
until it is hand tight.
Make sure that the Set
Screw is loose and
allows the Spin-Loc
Sleeve to turn freely.
See FIGURE 2.
Use the Spin-Loc
Wrench to tighten the
air tank in place. Use
CARE so you will not
scratch your aluminum
Frame. See FIGURE 2.
Figure 3
To rell your Spin-Loc Tank, attach
the 3000 p.s.i. rated quick disconnect
to the rell tting. See FIGURE 3.
Filling/Attaching the Air Tank
Spin-Loc™ Tank System
Figure 1
Spin-Loc Sleeve
Spin-Loc Wrench
Set Screw
Rell Fitting
Dust Cover
Rell
Fitting
3000 p.s.i. rated
quick disconnect
(Foster) Fitting