Operation Manual
WARNING: ALWAYS KEEP THE MUZZLE
POINTED IN A SAFE DIRECTION
WARNING: Before loading your airgun, make sure the safety is in the On
Safe position and the muzzle is pointed in a safe direction.
Cocking, uncocking, loading, ring
WARNING: Do not move the safety to the On Fire position unless the air
gun is pointed in a safe direction. Safe means that if the gun discharged it would
not cause injury or property damage. Mechanical safeties are not infallible and do
not replace the need for responsible gun handling practices.
Manually move the safety to the On Safe position by sliding safety lever back
towards trigger.
After loading, slide the bolt all the
way back and rotate it into either
notch at the rear of the cocking slot.
This indicates the bolt is all the way
back.
To re, take aim, slide the safety to
the On Fire position and squeeze the
trigger until the rie discharges.
To cock the rie, push forward on
the cocking knob until the bolt is
held in the open position.
To load a pellet, cock the rie and
leave the bolt forward, exposing
the breech. Push a pellet ALL THE
WAY into the breech with your
thumb or a pellet-seating tool. This
is important, because a pellet not
pushed in all the way can hold the
valve open when the rie res,
exhausting all the air from the tank.
Breech
Bolt/Cocking Knob
closed position
Bolt/Cocking Knob
open position
Safety Lever
On Safe Position
Safety Lever
On Fire Position