Operation Manual
NOTICE: REad ThIs maNual ENTIREly bEfORE
ChaRgINg OR usINg yOuR aIRguN
The cause for this is almost always a pellet that was not seated properly into the
and it creates a high pressure air seal that forces the valve to remain open.
Is the tank screwed tightly to the adapter on the pump?
Are all the adapter seals installed?
Is the brass bleed screw on the pump base closed?
tank is empty. Air tanks are shipped empty to comply with the law. An empty air
zero. Once the tanks starts to register a charge, you will notice that it takes 14 or 15
Troubleshooting