Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
P-SWDSDX771 Sanwa SDX-771 Digital Servo ................£59.99 P-SWDSDX772 Sanwa SDX-772 Digital Servo ................£59.99
Torque: 14.8 Kg/cm (4.8v)
Speed: 0.13 sec/60° (6.0v)
Dimensions: 39.2 x 20 x 34mm
Weight: 56g
Torque: 8.9 Kg/cm (4.8v)
Speed: 0.17 sec/60° (4.8v)
Dimensions: 39 x 20 x 37.4mm
Weight: 56g
P-SWDSDX801 Sanwa SDX-801 Digital Servo ............. £94.99
Torque: 6.4 Kg/cm (6.0v)
Speed: 0.08 sec/60° (6.0v)
Dimensions: 40.5 x 21 x 26.5mm
Weight: 50g
A new low-profile, digital servo designed
for use in cars where space is at a
premium and weight needs to be kept
low. You still have twin ball races and
metal gears for great durability but with
the advantage of high speed.
P-SWDSDX901 Sanwa SDX-901 Digital Servo ..............£124.99
Torque: 23 Kg/cm (4.8v)
29 Kg/cm (6.0v)
Speed: 0.17 sec/60° (4.8v)
Dimensions: 40.5 x 21 x 38mm
Weight: 65g
The ultimate ‘power’ servo to suit the
biggest aircraft and helicopters that
require a standard size servo. Not only
is there immense torque but the speed
is quite rapid as well. With tough metal
gears and twin ball races and digital
holding power, this is one ‘heavy duty’
servo!!
Sister servo to the SDX-771 but with the
emphasis on torque rather than outright
speed. With nearly 9Kg/cm of torque,
metal gears and twin ball races, the
SDX-772 has uses in aircraft and
helicopters alike.
A new high-speed, digital servo for use
in both aircraft and helicopters where
the torque of 6.6Kg/cm is sufficient, but
speed and holding power are a greater
priority. Twin ball races and metal gears
are standard.
P-SWDSDX851 Sanwa SDX-851 Digital Servo ................£94.99
Torque: 4.7 Kg/cm (4.8v)
Speed: 0.10 sec/60° (4.8v)
Dimensions: 40.5 x 21 x 26.5mm
Weight: 50g
A new, low profile servo designed for
aircraft wing installations where space is
at a premium. Particularly well suited to
gliders. Twin ball races and metal gears
ensure durability under load.
P-SWDSDX757 Sanwa SDX-757 Digital Servo ..............£109.99
A high resolution, standard-size servo for
1/10th scale cars/buggies with twin ball
races and metal gears. The coreless,
brushed motor is tough, with a good
speed of 0.11secs on 6.0v.
Torque: 7.0 Kg/cm (6.0v)
Speed: 0.11 sec/60° (6.0v)
Dimensions: 39 x 20 x 37.4mm
Weight: 59g
Digital Servo Digital Servo
Digital Servo
Digital Servo
Digital Servo Digital Servo