Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
P-VMIX3 V-Tail Mixer ........................................................ £14.99
P-JESP06 Jeti R/C Switch ...........£24.99
The Jeti Universal switch is suitable for switching
ON and OFF auxiliary functions. Perfect for
lights, noise generators, fire fighter canon pumps
plus a host of other applications.
IMPORTANT: SHOULD NOT BE USED FOR CONTROL OF
POWER MOTORS.
P-JEMUI030 Jeti MUI 30 .................£39.99
P-JEMT125 Jeti MT125 ................. £44.99 P-JEMT300 Jeti MT300 ..................£49.99
P-JEMUI075 Jeti MUI 75 ..................£44.99
P-JEMRPM Jeti MRPM ................... £39.99
The MT 125 is a device for measuring and
recording temperature data from temperature
sensors which connect to the MT125 module.
The MT125 can be connected to a Jeti BOX, to
a receiver or to a Duplex Expander.
Specifications
Weight: 10g
Temperature Range max: [°C] +85
Temperature Range min: [°C] -10
Range of measured temperature max: [°C] +125°C
Range of measured temp min: [°C] -55°C
Voltage Range: 3.5~8.4V
Dimensions: 19 x 14 x 4mm
Designed to be used in conjunction with the Jeti
Duplex system this sensor will read your model’s
onboard battery voltage, current draw (up to
30A) and measure the mAh of capacity used.
The MRPM module is designed to measure the
rpm of all types of engines.
The measurement is made using an optical
sensor and measures actual rotation and actual
power of the propeller. The maximum speed and
the maximum propeller output power are recorded
also.The measured values are displayed using
the Jeti BOX terminal and wireless transmission
of the information can be seen in real time using
the Duplex 2.4GHz system.
Designed to be used in conjunction with the
Jeti Duplex system, this sensor will read your
models onboard battery voltage, current draw
(up to 75A) and measure the mAh of capacity
used.
Similar to the MT125, the MT300 is designed
to measure a larger range of temperatures (to
a maximum of +300°C). Again, it can also be
connected to a Jeti BOX, receiver or Duplex
Expander.
Specifications
Weight: 6g
Temperature Range max: [°C] +85
Temperature Range min: [°C] -10
Range of measured temperature max: [°C] +300°C
Range of measured temp min: [°C] -40°C
Voltage Range: 3.5~8.4V
Dimensions: 19 x 14 x 4mm
This V-Tail Mixer is used to mix 2 channels so
as to provide control for surfaces
such as elevons. It can be used
in cases where mixing is not
available on the
transmitter. Good
examples would be a
Delta Wing model or V-Tail
glider.
Extremely
Easy to Use
and Very
Reliable