Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
P-JEDUR5
Jeti Duplex 5Ch Receiver 2.4GHz ...... £69.99
P-JEDUR4
Jeti Duplex 4Ch Receiver 2.4GHz ......£64.99
P-JEDUR5I
Jeti Duplex 5Ch Indoor Receiver 2.4GHz £69.99
P-JEDUMTF
Jeti Duplex Module 2.4GHz TF ......... £114.99
P-JEDUMTU
Jeti Duplex Module 2.4GHz TU ......... £124.99
P-JEDUR6F
Jeti Duplex 6Ch Receiver 2.4GHz R6F . £71.50
P-JEDUR7
Jeti Duplex 7Ch Receiver 2.4GHz ...... £73.99
P-JEDUR8
Jeti Duplex 8Ch Receiver 2.4GHz ...... £91.99
P-JEDUR6
Jeti Duplex 6Ch Receiver 2.4GHz ...... £74.99
This is the lightest Jeti Receiver, weighing only
3g and is designed for indoor operation. It uses
JST connectors for all the channels except
channel 3 (for the motor) and has an additional
telemetry channel too!
A 2.4GHz, FHSS
internal circuit board
plus aerial. Can only
be used with Jeti
Duplex receivers.
Has built in receiver
for download data
accessed by the Jeti
BOX. Featuring Jeti’s
own unique software
for unbelievable link
security and fast data
transfer. Can be fitted to
most transmitters with
enough room & PPM
transmission.
A 2.4GHz, FHSS
module for plug
in fitment to many
Futaba and Hitec sets.
Can only be used with
Jeti Duplex receivers.
has built in receiver
for download data
accessed by the Jeti
BOX.
Featuring Jeti’s own
unique software for
unbelievable link
security and fast data
transfer.
Compatible transmitters: Futaba – FF7 (old), FF8, 9C, 9Z,
FC-18, Hitec – Optic 6, Eclipse 7
Can be fitted to Futaba transmitters
at Ripmax’s service centre.
Specifications
Weight: 4.8g
Aerial Length: 2 x 100mm
Voltage Range: 3.2~8.4V
Dimensions: 35 x 20 x 7mm
With extra connection for telemetry use
Channels: 4
Specifications
Weight: 5.2g
Aerial Length: 2 x 100mm
Voltage Range: 3.2~8.4V
Dimensions: 44 x 20 x 7mm
With extra connection for telemetry use
Channels: 5
Specifications
Weight: 5.2g
Aerial Length: 2 x 45mm
Voltage Range: 3.2~8.4V
Dimensions: 44 x 20 x 7mm
With extra connection for telemetry use
Channels: 5
Specifications
Weight: 11.0g
Aerial Length: 2 x 100mm
Voltage Range: 3.2~8.4V
Dimensions: 45 x 24 x 12.5mm
With extra connection for telemetry use
Channels: 6
Specifications
Weight: 3.0g
Aerial Length: 45mm
Voltage Range: 3.2~8.4V
Dimensions: 38 x 20 x 6mm
Channels: 6
Specifications
Weight: 5.5g
Aerial Length: 2 x 100mm
Voltage Range: 3.2~8.4V
Dimensions: 40 x 20 x 7mm
With extra connection for telemetry use
Channels: 7
Specifications
Weight: 15.0g
Aerial Length: 2 x 200mm
Voltage Range: 3.2~8.4V
Dimensions: 50 x 30 x 12.5mm
With extra connection for telemetry use
Channels: 8