Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
O-RAMCG1 Multi Function Charge lead .............................£7.25
O-SKYABL5 SkyRC IMAX Adaptor Board Lead B5 ..............£1.50
O-SKYABL6 SkyRC IMAX Adaptor Board Lead B6+ ............£1.50
O-SKYABL8 SkyRC IMAX Adaptor Board Lead B8 ............. £TBA
Ever wanted to charge a battery and found that you do not
have the right lead or have lost it? Well, here’s
the answer!
This single lead has most of the
common plugs/sockets to charge the
majority of batteries on the market
in the UK today. It is not a lead for
charging multiple batteries at once,
it is merely for charging one battery
with the correct connector. No more
frustrating searches for the correct
charge lead, the multi-function charge
lead does it all!
O-SKYZCLIP SkyRC IMAX Crocodile Clips 4mm Plugs ...........£1.50
Designed to convert 4mm connectors to
crocodile power clips. Perfect for connecting
to a 12v battery at the field without permanently adapting your
power leads.
Fed up of being unable to charge more than one or two batteries at
the same time? What about being unable to charge totally different
capacities and chemistries simultaneously? At last, SkyRC have the
answer in the form of their new Quattro B6 charger.
This is effectively four B6+ chargers all built into one compact
case. Each charger has its own display screen and
programming buttons for complete, independent control.
Each charger has its own balance port for Lithium type
battery balancing and one balance board for XP and TP
plugs is supplied (others are available as options).
Two of the chargers have a temperature sensor
socket which also doubles as a PC interface
socket. These sensors/cables are options.
The Quattro B6 is built into a sturdy aluminium
case with extensive cooling fins to handle the 50W
charge per charger that it can provide. That’s a total
of 200W. You will need a good 12V battery or a 200W
power supply as a power source. The Pro-Peak 20A power
supply is ideal.
Specification (Per Charger)
•
Operating Voltage – DC 11~15V
•
50W Charge, 5W Discharge
•
1~15 Cells Ni-MH/Ni-Cd
•
1~6 Cells Li-Po/Li-Ion/Li-Fe
•
1~10 Cells Lead Acid
•
Balancing Current - 300mA
Weight: 1.09Kg
Dimensions: 225.4 x 158.6 x 62.5mm
O-SKYCHB6Q SkyRC IMAX Quattro B6 Charger ........................................................... £144.99
O-SKYZTEMP SkyRC IMAX Temperature Sensor .............................................................. £4.99
12V power-in lead
for an alternative
way of
connecting a
power supply.
Can also be
used as a
charging output
lead for Futaba
transmitters.
The Only Charge
Lead You Need!
It’s the Swiss Army
Knife of Charge Leads!
The Only Charge
Lead You Need!
It’s the Swiss Army
Knife of Charge Leads!
Replacement
leads for the
IMAX charger range.
O-SKYZPL12V SkyRC IMAX 12V Input Lead
(& Tx Charge Lead) .......................... £1.99