Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
O-IPWM Pro-Peak Watt Meter ........................................ £34.99
O-IPTW2SEH Pro-Peak Twins Batt. Adapter 2S EH ....£2.99
O-IPTW2STP Pro-Peak Twins Batt. Adapter 2S TP .....£2.99
O-IPTW2SXH Pro-Peak Twins Batt. Adapter 2S XH ....£2.99
O-IPTW3SEH Pro-Peak Twins Batt. Adapter 3S EH ....£2.99
O-IPTW3STP Pro-Peak Twins Batt. Adapter 3S TP .....£2.99
O-IPTW3SXH Pro-Peak Twins Batt. Adapter 3S XH ....£2.99
Specifications:
•
Operates From 4.8~60V
From 0V With Optional Auxiliary Battery
•
Measures:
Current (Amps) 0~130A, Resolution 0.01A
Voltage (Volts) 0~60V, Resolution 0.01V
Power (Watts) 0~6554W, Resolution 0.1W
Current Delivery (Amp Hours) 0~65Ah, Resolution 0.001Ah
Energy (Watt Hours) 0~6554Wh, Resolution 0.1Wh
At last, a heavy duty watt meter that can monitor the power consumption of
your motor/load source and ‘freeze’ record the peaks for later checking.
The Watt Meter can be used to measure battery performance, motor
performance, charger performance, speed controller (ESC) performance
or even the current demanded by a receiver/servo combination. An
important feature to decide if a BEC has enough power.
The moulded plastic case has an easy-grip finish and the unit is both
compact and durable. The blue illuminated, LCD display is clear and
logically laid out for easy understanding.
Allows the simultaneous charging of either 2x 2S or 2x 3S battery packs using a single
charger!
Adapter 2S EH Use with 2 x 2S battery packs with EH connectors
Adapter 2S TP Use with 2 x 2S battery packs with TP connector
Adapter 2S XH Use with 2 x 2S battery packs with XH connectors
Adapter 3S EH Use with 2 x 3S battery packs with EH connectors
Adapter 3S TP Use with 2 x 3S battery packs with TP connectors
Adapter 3S XH Use with 2 x 3S battery packs with XH connectors
Measure Performance of Battery,
Motor, Charger, ESC or Servo/Receiver
Combination
Heavy
Duty
O-SKYCHC403 SkyRC IMAX C403 Charger ....................... £24.99
A modern charger for the modern
modeller, that’s the C-403!!
This is a charger designed for Lithium
based batteries only, but copes with Li-Ion, Li-Po and Li-Fe
technologies with a regime specific for each. The built in balancer can
work on 2, 3 or 4 cell packs that have a cell voltage variation other
chargers might not like. It will also charge single cells. The charge
current can be varied from 0.1A to 3.5A in 0.01A increments using
the large LCD display screen. Those small increments are particularly
useful for the latest generation of indoor models with small Li-Po packs.
At the other end of the scale, you can also charge a 4S pack at 3A or a
2S pack at 4.75A and still stay inside the 40W circuit limit. That kind of
range puts the C-403 into the car, boat and aircraft
markets for the majority of sports modellers! An
excellent choice for foam RTFs for instance.
The tough, aluminium case has that air of quality
but with real strength. The side balance port
accepts XH and EH plugs and a balance board
& lead is also provided for TP plugs. Optional
boards for PQ are available.