Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
O-IP3060 Pro-Peak Warrior EQ DC Charger ............ £79.99
O-IP3060/EUR Pro-Peak Warrior EQ DC Charger EU ...... £79.99
O-IPTS1 Pro-Peak Temperature Sensor ................... £2.99
Pro-Peak have an enviable reputation
for producing feature packed products
that offer truly outstanding value! The
brilliant new Gallant EQ and Sigma II
EQ chargers are no exception. These
high performance, micro-processor
controlled, fast chargers/dischargers
have a built-in Lithium balancer. They
are both perfect for charging Li-Ion, Li-Po,
Li-Fe, Ni-MH, Ni-Cd and Lead Acid batteries from
a 11~18.0v power source in the case of the Gallant
EQ and either 11~18V DC or 100~240V AC when using the
Sigma II EQ. Total charging power for both is 50W. The Gallant
EQ and Sigma II EQ do just about everything an average club modeller
could need. Supplied with built-in XH balance ports and TP adaptor board to
suit Impulse, Flight Power, Thunder Power as standard. Supplied complete
with TP adaptor board. Many other batteries can be accommodated by using
the optional EH and PQ boards. The Gallant EQ and Sigma II EQ can be
further enhanced with an optional temperature sensor. The Gallant EQ
also has a home PC USB port.
O-IP3030 Pro-Peak Gallant EQ DC Charger ............. £54.99
O-IP3050 Pro-Peak Sigma II EQ AC/DC Charger ..... £69.99
O-IP3050/EUR Pro-Peak Sigma II EQ AC/DC Chgr EU ..... £69.99
Circuit Power: 50W max
Charge Current: 0.1~5.0A
Discharge Current: 0.1~1.0A
Current Drain
(for Li-Po balancing): 200mAh/cell
Ni-MH/Ni-Cd Cells: 1~15 cells
Li-Po/Li-Ion Cells: 1~6 cells
Pb Battery Voltage: 2~20v
Specifications Gallant EQ & Sigma II EQ:
Input Voltage - Gallant EQ: 11.0~18.0v Input Voltage - Sigma II EQ: 11.0~18.0v/100~240v
Sigma II EQ
Dual Power
11
~
18v/
100
~
240v
High
Quality
Metal
Cases
Gallant EQ
11
~
18v Input
Tough, High Quality
Metal Case
Specifications:
Input Voltage: 10.0~18.0v
Circuit Power: 200W max
Charge Current: 0.1~10.0A
Current Drain
(for Li-Po balancing): 200mAh/cell
Discharge Current: 0.1~5.0A
Discharge: 25W
Ni-MH/Ni-Cd Cells: 1~18 cells
Li-Lo/Li-Po/Li-Fe Cells: 1~6 cells
Pb Battery Voltage: 2~24v
Dimensions: 142x132x32mm
Weight: 360g
Micro-Processor
Controlled
Micro-Processor
Controlled
This range-topping high performance charger from the experts at Pro-Peak offers
a simply amazing specification at a remarkable low price. The brilliant new Warrior
EQ charger is a high power, micro-processor controlled, fast charger/discharger
and has a built-in Lithium balancer. It’s perfect for charging Li-Ion, Li-Po, Li-Fe,
Ni-MH, Ni-Cd and Lead Acid batteries from a 10~18.0v power source. With a
maximum internal circuit power of 200W and a variable charge current of up
to 10.0A, the Warrior EQ is a versatile and easy-to-use unit. With charging and
discharging cycles, 5 regime memories, a storage setting for Lithium packs and
much more, the Warrior EQ does just about everything a modeller could need.
Supplied with built-in XH balance ports and TP adaptor board to suit Impulse,
Flight Power, Thunder Power and many other batteries with optional EH and PQ
boards also available. The Warrior EQ can be further enhanced with an optional
temperature sensor or USB link for your home PC. With a high quality metal
case with integral heatsinks and fans for even better cooling! With 200W
of power available, the use of the Twins adaptors (see page 52) makes
charging two (2S or 3S) packs at good currents readily achievable.
High Power, Intelligent, Digital Balance Charger
200
W
Up to