Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
F-SKYRM01 SkyRC Retracts - Mains Set (Micro) ............ £54.99 F-SKYRM02 SkyRC Retracts - Mains Set (Mini)............... £64.99
A new range of air retracts available in both mains only and trike sets to suit a variety of aircraft from 1.6Kg (Micro) up to
1.2~1.4 size models (Large). Both Micro and Mini sets feature Air Up/Spring Down operation, whereas Standard and Large
sets feature full Air Up/Air Down operation with variable rate valves for the ultimate scale control!
•
Main Gear Units (x2)
•
Undercarriage Legs (x2)
•
3-Way Connector (x2)
•
2.5m Pressure Tubing
•
65ml Air Tank
•
Filler Valve
•
Control Valve
•
Aviation Grade Aluminium
•
Suitable for Models up to
1.6Kg (3.5lbs)
•
Air Up / Spring Down
Operation
•
Main Gear Units (x2)
•
Undercarriage Legs (x2)
•
3-Way Connector (x2)
•
2.5m Pressure Tubing
•
90ml Air Tank
•
Filler Valve
•
Control Valve
•
Aviation Grade Aluminium
•
Suitable for Models up to
2.72Kg (6lbs)
•
Air Up / Spring Down
Operation
Mains
Set Mini
HELICOPTERS
P-RMXLS01 Light Set 1 - Aircraft/Helicopters ........................£14.99
P-RMXLS02 Light Set 2 - Cars (Scale) ....................................£14.99
P-RMXLS03 Light Set 3 - Cars (Flashing) ...............................£19.99
AIRCRAFT
CARS
These light sets will add a level of scale realism to your models and
are extremely easy to install. Using long life, super-bright (3 & 5mm
diameter) LEDs, you won’t fail to see any model they’re installed in!
All LEDs or LED combinations have separate plugs fitted, so can be
moved around for different lighting combinations!
Light Set 1 is for aircraft and helicopters and features beacon,
navigation and strobe lighting. Set contents: Main Control Board,
2 x White LEDs, 1 x Green LED, 1 x Red LED, 2 x White Strobe LEDs,
2 x Slow Flashing Red LEDs and Mounting Kit.
Light Set 2 is for cars and features headlights, tail lights, steering
signals and brake lights, all controlled from your transmitter! Set
contents: Main Control Board, 2 x Y-Lead, 2 x White LEDs, 2 x Red
LEDs, 2 x Orange LEDs and Mounting Kit.
Light Set 3 is for cars and features 4 setting options; always on or one
of three combination flashing sequences to mimic pace cars, low riders,
monster trucks - the only limit is your imagination! LEDs can be switched
around as required to suit different applications. Switch operated. Set
contents: Main Control Board, 6 x White LEDs, 2 x Blue LEDs, 2 x Red
LEDs, 2 x Yellow LEDs, 1 x Y-lead, 1 x Mode Selection Switch and
Mounting Kit.
Input Voltage for all sets: 4.8~6V (Recommend 6V for maximum
brightness). This can be from your receiver or a separate power source.
Adds an extra touch of realism
and drama to your model!
Mains
Set Micro