Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
We recommend the fitting of a throttle ‘Failsafe’ on all FG Modellsport vehicles.
C-FG28000R Monster Truck 4WD RTR (White) ............... £1,049.99
C-FG28010R Monster Truck 4WD RTR (Yellow) .............. £1,049.99
C-FG28050 Monster Truck 4WD ARR (Clear) ................... £849.99
C-FG28050R Monster Truck 4WD RTR (Clear) ................ £1,049.99
C-FG38010R Monster Hummer 4WD RTR (Yellow) ......... £1,049.99
C-FG38030R Monster Hummer 4WD RTR (Black) ........... £1,049.99
C-FG38050 Monster Hummer 4WD ARR (Clear) .............. £849.99
C-FG38050R Monster Hummer 4WD RTR (Clear) ........... £1,049.99
C-FG48020R Monster Jeep 4WD RTR (Red) .................... £1,049.99
C-FG48030R Monster Jeep 4WD RTR (Black) ................. £1,049.99
C-FG48050 Monster Jeep 4WD ARR (Clear) .................... £844.99
C-FG48050R Monster Jeep 4WD RTR (Clear) .................. £1,049.99
Shown with option bumper,
side bars & roll cage fitted
Shown with option
bumper & side
bars fitted
FG’s Monster series vehicles are designed to travel over obstacles impossible for smaller
and less powerful machines. Tough, reliable, with plenty of grunt and ground clearance to
tackle the roughest off road terrain! 210mm diameter tyres all round ensure you won’t
get stuck in the muck and 4WD guarantees that all 4 wheels are transferring power to
the ground, all the time. Available with either Truck, Hummer or Jeep body shells in
a selection of formats (ARR/RTR/Painted/Clear) there is no lack of choice. And,
you can further bling these models up with the addition of optional bumpers,
side bars and roll cages as applicable.
Required (Not Included) ARR:
Minimum 2 channel radio with 2 x servo
- steering (15~20Kg), throttle/rear brake
(15Kg), receiver battery & charger,
failsafe (if not part of chosen radio)
•
4mm Countersunk Alloy Chassis
•
Alloy Side Protection Chassis Stiffeners
•
Constant Shaft & Belt 4WD
•
26cc Zenoah Pullstart Petrol Engine
•
Twin Differentials w/Hardened Bevels
•
Large Capacity Fuel Tank
•
Adjustable Linkages
•
Independent Oil Filled Shocks
•
Adjustable Servo Saver
•
Scale Wheels & High Grip Monster Tyres
•
Decal Sheet
•
Ballraced
Take everything the standard Monster 4WD chassis has to offer and then replace the
majority of it with precision machined alloy parts to add a level of precision, strength
and sophistication that has to be seen to be believed! Better, stronger and let’s be
honest, beautiful to behold! Available with either mechanical or hydraulic brake
systems for the ultimate in stopping power!
•
4mm Countersunk Alloy Chassis
•
Constant Shaft & Belt Driven 4WD
•
26cc Zenoah Pullstart Petrol Engine
•
Tuned Pipe
•
Alloy Side Frame Stiffeners
•
Combination Nylon/Aluminium Roll Cage
•
Independent Adjustable Alloy Oil Shocks
•
Twin Geared Diffs with Hardened Bevels
•
Alloy Suspension Mounts
•
Alloy Front & Rear Axle Mounts & Bases
•
Alloy Front & Rear Shock Stays
•
Alloy Front & Rear Hubs/Knuckles
•
Moulded Radio Box
•
Alloy Radio Plate
•
Alloy Gear Carrier
•
Steel Gearwheels
•
Alloy Engine Mounts
•
Alloy Adjustable Servo Saver
•
Ball-Type Stabilisers Front & Rear
•
Large Capacity Fuel Tank
•
Alloy Suspension Arms, Front, Rear & Upper
•
Chrome Plated Wheels glued to High Grip Tyres
•
Mechanical ‘Tuning’ or Hydraulic
Brake System
Required (Not Included): 3 channel radio with 4 x servo (2 x steering (15~20Kg), throttle/rear brake
& front brake - both 15Kg), receiver battery & charger, failsafe (if not part of chosen radio)
High performance
26cc Zenoah 2-stroke
petrol engine, provides
awesome rugged power!
Shown with option side
bars fitted
Length: 670~740mm
Wheelbase: 470mm
Height: 350~390mm
Width: 510mm
Specifications