Specifications

www.ripmax.com
Distributed to all good model shops by: See the full Ripmax range at www.ripmax.com
We recommend the fitting of a throttle ‘Failsafe’ on all FG Modellsport vehicles.
C-FG68040R Baja Buggy 4WD RTR (Red/White) ............ £939.99
C-FG68050 Baja Buggy 4WD ARR (Clear) ..................... £774.99 C-FG68050R Baja Buggy 4WD RTR (Clear) ..................... £924.99
C-FG06006 Leopard Race Competition Buggy Kit w/26cc .... £849.99
C-FG58040R Off-Road Beetle 4WD RTR (Painted) ... £974.99
C-FG58050R Off-Road Beetle 4WD RTR (Clear) ....... £959.99
C-FG58050 Off-Road Beetle 4WD ARR (Clear) ....... £799.99
Based on the proven Marder 2WD chassis, the Leopard features a
longer wheelbase, adjustable alloy oil shocks, 18 tooth steel pinion
gear, ball drive shafts with protective bellows, foam front bumper,
alloy brake calliper, polycarbonate body & wing, tuned pipe system
and 26cc Zenoah pullstart petrol engine!
Required (Not Included):
Minimum 2 channel radio with 2 x servo - steering (15~20Kg), throttle/rear
brake (15Kg), receiver battery & charger, failsafe (if not part of chosen
radio)
The 2WD Baja Buggy owed much of its heritage to the venerable Marder buggy, but
the new 4WD version has replaced and enhanced so much of the original chassis that
comparisons are now pointless. Its combination belt and shaft drivent 4WD gives an
increase in traction that can really be appreciated when driving on, over and through
the rough! This is the Baja on steroids!. Oil shocks/springs have been beefed to allow
for the increased weight and maximise bump suppression. The Baja Buggy 4WD is
available in a number of formats; ARR (largely pre-built with clear body shell & wing,
without radio control), or RTR (pre-built with radio control included) with either clear or
painted body shell & wing.
Required (Not Included) ARR:
Minimum 2 channel radio with 2 x servo - steering (15~20Kg), throttle/rear brake (15Kg), receiver
battery & charger, failsafe (if not part of chosen radio)
Includes
Powerful 26cc
Zenoah Engine
Based on the 4WD Monster Truck chassis (see over), the
Off-Road Beetle uses the wheels and tyres from the Baja
Buggy with a retro body to make the ultimate dune racer!
Available in three formats; ARR (largely pre-built with clear body
shell & wing, without radio control), or RTR (pre-built with radio
control included) with either clear or painted body shell & wing.
•
4mm Countersunk Alloy Chassis
•
Constant Shaft & Belt 4WD
•
26cc Zenoah Pullstart Petrol Engine
•
Twin Differentials with Hardened Bevels
•
Adjustable Linkages
•
Independent Oil Filled Shocks
•
Adjustable Servo Saver
•
Low Profile Wheels Pre-Glued to High
Grip Tyres
•
Decal Sheet
•
Ballraced
Includes
Powerful 26cc
Zenoah Engine
Includes
Powerful 26cc
Zenoah Engine
If you already own one of
FG’s Marder, Monster or Baja
Buggy based 2WD models,
you can upgrade them to
full 4WD specification with
one of these comprehensive
sets!
Z-FG68500 Conversion Kit Monster Truck 4WD .......... £284.99
Z-FG68501 Conversion Kit Marder 4WD ....................... £284.99 Z-FG68502 Conversion Kit Baja Buggy 4WD ............... £284.99
Z-FG68500 Z-FG68501 Z-FG68502
Length: 720mm
Wheelbase: 505mm
Height: 285mm
Width: 435mm
Specifications
Length: 690mm
Wheelbase: 475mm
Height: 290mm
Width: 475mm
Specifications