Specifications

7
5. Always disconnect unit from power source before inspecting or servicing.
AIRFLOW SYSTEMS SETS THE STANDARD
The Airflow Systems Model V410 collects dust, welding smoke, and other dry pollutants in industrial
plants, shops, schools and factories. The general theory of operation is that air bearing pollutants passes
through the inlet and must make a 180
o
turn to pass through a spark screen where large particles fall out of
the air stream. The particulate laden air then passes through the (2) main 95% cartridge filters where the +1
and sub-micron particles are captured. The main filters have 150 ft
2
collection area each for maximum
intervals between service. The Vibra Pulse

is for filter cleaning with dry dust applications. After passing
through the filters, the cleaned air is then discharged thru the top of the unit. Figure 1 shows general
construction details.
The Model V410 is a complete portable collector. The unit comes equipped with four 5" industrial duty
casters (2 swivel, 2 fixed). It comes standard with (2) 3” FPT couplings for attachment of collection hoses.
The Model V410 can be mounted in a stationary location if desired by ordering it with the optional hopper
and stand kit.
The Model V410 is available with an external 99.97% HEPA filter or Adsorption Module (AD) if
required.