Brochure

MADE IN USA
Copyright © 2017 Airex Manufacturing Inc.
Airex Manufacturing, Inc. Reserves the right to make changes or improvements at any time without notice.
AIREX TITAN OUTLET™ - A wall outlet seal by Airex Manufacturing Inc., shall be provided and
installed with its compression gasket mounting method and must be fastened to wall surface with
supplied ICC-ES listed and approved non-corrosive screws with pre-loaded neoprene washers. Wall
Outlet must also integrate an over-molded, flexible, elastomeric sleeve for sealing, supporting and
isolating refrigerant pipes to also control vibration. The Wall Outlet shall also feature outdoor-rated
durability and shall provide wall expansion and contraction protection features achieved by gaskets and
seals as per energy code requirements. A stainless steel clamp must be utilized to create a “Mechanical
Connection” between wall seal and pipe insulation protector as intended per energy codes to allow
removable/reusable maintenance capabilities and designed to co-act with the AIREX E-FLEX GUARD
™ Pipe Insulation Protection Cover. Wall Outlet seal and insulation protector must both be sustainably
and securely installed, mechanically fastened together as one, due to piping vibration, and shall be
assembled without the use of adhesives or adhesive tapes as per energy code requirements. Wall
Outlet shall be tested and must meet the following testing: ASTM E 331 (Water Penetration),
ASTM E 283 (Air Leakage), and ASTM E 2178 - Air Permeance of Building Materials.
TITAN OUTLET
TM
U.S. Patents #9,091,377 B2, #9,523,200 B2
HVAC Pipe Penetration Wall Seal
Product Description and Specification
TITAN OUTLET MODEL NUMBERS
TM
Phone: [phone] Fax: [phone]
72170 Dunham Way, Suite D, Thousand Palms, CA 92276
www.airexmfg.com
3.90"
4.25"
All-Surface
Light-Density
Wall Gasket
(Pre-Loaded)
Wall Mounted Outlet
Flexible
Inlet Sleeve
Stainless Steel
Adjustable Clamp
Anti-Corrosion,
Lubricated,
All-Material,
Tap Screws
Neoprene
Washers
(pre-mounted)
Wall Stud
and/or
Plywood
Exterior
Wall
Surface
7.50"
10.00"
TM
TM
TM
TM
TM
TGS
Model Series
Sleeve Diameters
TSS
Model Series
Sleeve Diameters
2.50"
6.90"
7.25"
TGS-550-G
TGS-575-G
(Fits: 1" wall thickness pipe insulation with 3/4", 7/8" tube
or 3/4" wall thickness pipe insulation with 1-1/8" tube)
TSS-550-G
TSS-575-G
TGS-510-G
5.50"
Model TGS: Stucco, Masonry Applications
Model TSS: Limited Space & Compact Applications
Airex Part Number
TGS-510-G
3.1875” 3-3/16” 1”
TGS-550-G
TGS-575-G
2.375”
1.70” 1-11/16”
2-3/8”
1/2”
3/4”
Sleeve Diameter
Insulation
Thickness
Airex
Part Number
1/2”
3/4”
Insulation
Thickness
TSS-550-G
TSS-575-G
2.375”
1.70” 1-11/16”
2-3/8”
Sleeve Diameter
Airex
Part Number
Airex Part Number
TGS -34 Series Outlet
3/4” thick Gasket for
Overlapping Siding,
Brick and Masonry.
TGS Series Outlet
Flexible Sleeve
Can accomodate
Dual Mini-Split piping.
• ASTM E283 - Standard Test Method for Air Leakage
• ASTM E331 - Standard Test Method for Water Penetration of
Exterior Walls by Uniform Static Air Pressure
• ASTM E 2178 - Air Permeance of Building Materials
TITAN OUTLET
TM
Color Options
White - W
Gray - G
Substitute (G)
with (W)
for White
Energy
Efficient
Products
Refrigeration Pipe Penetration Detail
Exterior Wall or Parapet
Wall Seal Penetration Outlet with Elastomeric
Sleeve
Insulation Protective PVC
Cover
Elastomeric Line-Set
Compression & Anti-Vibration
Sleeve
Insulation for
Refrigeration
Suction Line
Refrigeration
Suction Line
Mechanical Connection Secured
With Stainless Steel Clamp
Refrigeration Liquid
Line Copper
Wall Fasteners Self-Tapping 3/8" Hex Head 1/4"
Diameter All Material Anchors Screws with
Elastomeric Washers
Wall Surface Seal
Elastomeric Gasket
Product Performance Testing
Polymer Material Testing
Approved Material & Performance Testing
Wall Outlet Sleeve (Elastomeric Polymer)
• ASTM D573-04 - Deterioration Test
• ASTM D746-07 - Brittleness Temperature Impact Test
Project
Contractor
Date
Specification Reference
SUBMITTAL SHEET
(Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube
or 1/2" wall thickness pipe insulation with 1-1/8" tube)
(Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube
or 1/2" wall thickness pipe insulation with 1-1/8" tube)
(Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube)
TGS-550-G-34
TGS-575-G-34
(Fits: 1" wall thickness pipe insulation with 3/4", 7/8" tube
or 3/4" wall thickness pipe insulation with 1-1/8" tube)
TGS-510-G-34
Model TGS 3/4” Gasket: Brick, Masonry, Overlapping Siding Applications
Airex Part Number
(Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube
or 1/2" wall thickness pipe insulation with 1-1/8" tube)
(Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube)
(Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube)
Available in 1/4” or 3/4”
thickness for brick, masonry,
overlapping siding. See (-34)
series part numbers.
Diameters are the same for (-34) series, 3/4” Gasket.
Wall Mounted Outlet (Rigid Plastic)
• ASTM D1525C-09 - Temperature Deformation Test
• ASTM D648-07 - Temperature Load Deformation Test
• UL 94 HB - Flammability Test
• UL 746C - Outdoor Suitability - f1 Rating