User's Manual
Table Of Contents
- Airespace Access Point (AP) Installation Guide
- Trademarks and Service Marks
- FCC Statements for Airespace AP
- About this Guide
- About the Airespace Access Point
- About Airespace AP Models
- About Airespace AP 802.11a Radio Cards
- About Airespace AP External and Internal Antennas
- About Airespace AP LEDs
- About Airespace AP Connectors
- About Airespace AP Power Requirements
- About Airespace AP External Power Converter
- About Power Over Ethernet
- About Airespace AP Mounting Options
- About Airespace AP Physical Security
- Airespace Access Point Quick Installation Guide
4/21/03 Flush Wall Mount
90-100xxx-000 Airespace Access Point Quick Installation Guide 12
Figure - Assembling the Airespace AP to the Flush-Mount Bracket
• Attach the cables to the sides of the AP.
Note: When the AP is powered up and is associated with an Airespace
Wireless Switch (Green/Power and Yellow/802.11b and/or Yellow/
802.11a LEDs lit), the AP begins broadcasting its beacon signal(s).
When this happens, complete the installation as quickly as possible to
remove yourself from within 8 inches (20 cm) of the AP to comply with
FCC RF radiation exposure guidelines.
You have installed the Airespace AP. Repeat Step 3: Mounting the Airespace
APs for each AP location, and then continue with Step 4: Returning MAC
Information.