User's Manual

4/21/03 FCC Statements for Airespace AP

90-100xxx-000 Airespace AP Installation Guide iii

FCC Statements for Airespace AP

Class A Statement

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a resi-

dential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

RF Radiation Hazard Warning

To ensure compliance with FCC RF exposure requirements, this device must

be installed in a location such that the antenna of the device will be greater

than 20cm (8 in.) from all persons. Using higher gain antennas and types of

antennas not covered under the FCC certification of this product is not

allowed.

Installers of the radio and end users of the system must adhere to the instal-

lation instructions provided in this manual.

Non-Modification Statement

Use only the supplied internal antenna, or external antennas supplied by the

manufacturer. Unauthorized antennas, modifications, or attachments could

damage the badge and could violate FCC regulations and void the user’s

authority to operate the equipment.

Note: No 802.11a external antennas are currently certified or available

in this release. Contact Airespace, Inc. for a list of FCC-approved

802.11b external antennas.

Deployment Statement

This product is certified for indoor deployment only. Do not install or use this

product outdoors.