User's Manual
Table Of Contents
- Airespace Access Point (AP) Installation Guide
- Trademarks and Service Marks
- FCC Statements for Airespace AP
- About this Guide
- About the Airespace Access Point
- About Airespace AP Models
- About Airespace AP 802.11a Radio Cards
- About Airespace AP External and Internal Antennas
- About Airespace AP LEDs
- About Airespace AP Connectors
- About Airespace AP Power Requirements
- About Airespace AP External Power Converter
- About Power Over Ethernet
- About Airespace AP Mounting Options
- About Airespace AP Physical Security
- Airespace Access Point Quick Installation Guide
4/21/03 Airespace AP Power Requirements
90-100xxx-000 Airespace AP Installation Guide 11
Airespace AP Power Requirements
About Airespace AP Power Requirements
The Airespace AP requires a 48 VDC nominal (between 38 and 57 VDC) power
source capable of providing 7 Watts. The polarity of the DC source does not
matter because the Airespace AP can use either a +48 VDC or a -48 VDC
nominal source.
Airespace APs can receive power from an external power converter (see
figure below) plugged into the side of the Airespace AP case, or from Power
Over Ethernet.
Figure - Typical Airespace AP External Power Converter
For more information about the Airespace AP specifications and capacities,
refer to Specifications
, to be determined.