User's Manual
Table Of Contents
- Airespace Access Point (AP) Installation Guide
- Trademarks and Service Marks
- FCC Statements for Airespace AP
- About this Guide
- About the Airespace Access Point
- About Airespace AP Models
- About Airespace AP 802.11a Radio Cards
- About Airespace AP External and Internal Antennas
- About Airespace AP LEDs
- About Airespace AP Connectors
- About Airespace AP Power Requirements
- About Airespace AP External Power Converter
- About Power Over Ethernet
- About Airespace AP Mounting Options
- About Airespace AP Physical Security
- Airespace Access Point Quick Installation Guide
4/21/03 Step 4: Returning MAC Information
90-100xxx-000 Airespace Access Point Quick Installation Guide 13
Step 4: Returning MAC Information
Step 4: Returning MAC Information
When you have completed the installations as outlined in Step 3: Mounting
the Airespace APs, return the MAC addresses and their locations on the maps
or floorplans to the network planner or manager. The Airespace Control
System (ACS) software operators will use the MAC address and location infor-
mation to create maps for precise wireless LAN management.
Also return any unused mounting kit hardware and external power converters
to the network planner or manager for use in future deployments.
Note: Network Planner or Manager, now is a good time to register your
Airespace APs at www.airespace.com.