User's Manual
Table Of Contents
- Airespace Access Point (AP) Installation Guide
- Trademarks and Service Marks
- FCC Statements for Airespace AP
- About this Guide
- About the Airespace Access Point
- About Airespace AP Models
- About Airespace AP 802.11a Radio Cards
- About Airespace AP External and Internal Antennas
- About Airespace AP LEDs
- About Airespace AP Connectors
- About Airespace AP Power Requirements
- About Airespace AP External Power Converter
- About Power Over Ethernet
- About Airespace AP Mounting Options
- About Airespace AP Physical Security
- Airespace Access Point Quick Installation Guide
4/21/03 Ceiling Mount
90-100xxx-000 Airespace Access Point Quick Installation Guide 8
• Position the ceiling-mount base so its keyhole slots are partly on the
drywall, sheet metal, or other screw heads installed in Step 2:
Preparing Mounting Locations.
Note: If the screws do not securely hold the ceiling-mount base,
remove the AP and adjust the screws until they hold the ceiling-mount
base securely.
• Attach the cables to the sides of the AP.
Note: When the AP is powered up and is associated with an Airespace
Wireless Switch (Green/Power and Yellow/802.11b and/or Yellow/
802.11a LEDs lit), the AP is broadcasting its beacon signal(s). When
this happens, complete the installation as quickly as possible to
remove yourself from within 8 inches (20 cm) of the AP to comply with
FCC RF radiation exposure guidelines.
• Slide the ceiling-mount base onto the drywall, sheet metal, or other
screw heads until it snugs into place.
You have installed the Airespace AP. Repeat Step 3: Mounting the Airespace
APs for each AP location, and then continue with Step 4: Returning MAC
Information.