User's Manual
Table Of Contents
- Welcome to the Airespace Product Guide!
- OVERVIEWS
- About the Airespace System
- About the AireOS
- Single-Airespace Switch or Appliance Deployments
- Multiple-Airespace Switch and Appliance Deployments
- About AireOS Security
- About Airespace Wired Security
- About AireWave Director Software
- About the Master Airespace Switch or Appliance
- About the Primary Airespace Switch or Appliance
- About Client Roaming
- About External DHCP Servers
- About Airespace Mobility Groups
- About Airespace Wired Connections
- About Airespace WLANs
- About File Transfers
- About Power Over Ethernet
- About Airespace Switches and Appliances
- 4012 and 4024 Airespace Wireless Switch Models
- 4101 and 4102 Airespace WLAN Appliance Models
- Airespace Switch and Appliance Features
- Airespace Switch and Appliance Model Numbers
- Airespace Wireless Switch Direct Connect Mode
- Airespace Switches and Appliances in Appliance Mode
- Airespace Wireless Switch Hybrid Mode
- About the Distribution System Port
- About the Service (Management) Port
- About the Startup Wizard
- About Airespace Switch and Appliance Memory
- Airespace Switch and Appliance Failover Protection
- Switched Network Connection to the Airespace Switch or Appliance
- Enhanced Security Module
- About Airespace Access Points
- About Airespace AP Models
- About Airespace AP External and Internal Antennas
- About Airespace AP LEDs
- About Airespace AP Connectors
- About Airespace AP Power Requirements
- About Airespace AP External Power Converter
- About Airespace AP Mounting Options
- About Airespace AP Physical Security
- About Airespace AP Monitor Mode
- About Third-Party Access Points
- About Rogue Access Points
- About the Airespace Control System Software
- About the Airespace Web Browser Interface
- About the Airespace Command Line Interface
- About the Airespace System
- SOLUTIONS
10/10/03 Airespace AP Power Requirements
90-100584-004 Airespace Product Guide 54
About Airespace AP Power RequirementsAirespace AP Power Requirements
The Airespace AP requires a 48 VDC nominal (between 38 and 57 VDC) power source capable of
providing 7 Watts. The polarity of the DC source does not matter because the Airespace AP can use
either a +48 VDC or a -48 VDC nominal source.
Airespace APs can receive power from an external power converter (see figure below) plugged into the
side of the Airespace AP case, or from Power Over Ethernet
.
Figure - Typical Airespace AP External Power Converter
For more information about the Airespace AP specifications and capacities, refer to Specifications
, to be
determined.