User's Manual
Table Of Contents
- Welcome to the Airespace Product Guide!
- OVERVIEWS
- About the Airespace System
- About the AireOS
- Single-Airespace Switch or Appliance Deployments
- Multiple-Airespace Switch and Appliance Deployments
- About AireOS Security
- About Airespace Wired Security
- About AireWave Director Software
- About the Master Airespace Switch or Appliance
- About the Primary Airespace Switch or Appliance
- About Client Roaming
- About External DHCP Servers
- About Airespace Mobility Groups
- About Airespace Wired Connections
- About Airespace WLANs
- About File Transfers
- About Power Over Ethernet
- About Airespace Switches and Appliances
- 4012 and 4024 Airespace Wireless Switch Models
- 4101 and 4102 Airespace WLAN Appliance Models
- Airespace Switch and Appliance Features
- Airespace Switch and Appliance Model Numbers
- Airespace Wireless Switch Direct Connect Mode
- Airespace Switches and Appliances in Appliance Mode
- Airespace Wireless Switch Hybrid Mode
- About the Distribution System Port
- About the Service (Management) Port
- About the Startup Wizard
- About Airespace Switch and Appliance Memory
- Airespace Switch and Appliance Failover Protection
- Switched Network Connection to the Airespace Switch or Appliance
- Enhanced Security Module
- About Airespace Access Points
- About Airespace AP Models
- About Airespace AP External and Internal Antennas
- About Airespace AP LEDs
- About Airespace AP Connectors
- About Airespace AP Power Requirements
- About Airespace AP External Power Converter
- About Airespace AP Mounting Options
- About Airespace AP Physical Security
- About Airespace AP Monitor Mode
- About Third-Party Access Points
- About Rogue Access Points
- About the Airespace Control System Software
- About the Airespace Web Browser Interface
- About the Airespace Command Line Interface
- About the Airespace System
- SOLUTIONS
10/10/03 Single-Airespace Switch or Appliance Deployments
90-100584-004 Airespace Product Guide 6
• In Appliance Mode, Airespace APs connect to the Model 4012 or 4024 Airespace Wireless Switch
or 4101 or 4102 Airespace WLAN Appliances through the switched network. The switched
network equipment may or may not provide Power Over Ethernet to the Airespace APs.
Note that the 4102 Airespace WLAN Appliance uses two redundant GigE connections to bypass
single network failures. At any given time one of the 4102 Airespace WLAN Appliance GigE
connections is active and the other is passive. Upon a switched network failure, the active
connection becomes passive, and the passive connection becomes active.
Figure - Typical Airespace Wireless Switches and WLAN Appliances Deployed in Appliance Mode