User's Manual

3/24/05 Step 5: Returning MAC Information

90-100xxx-001 8

You have installed the Airespace 1300. Repeat Step 4: Mounting the Airespace 1300s for each

Airespace AP location, and then continue with Step 5: Returning MAC Information

Step 5: Returning MAC InformationStep 5: Returning MAC Information

When you have completed the installations as outlined in Step 4: Mounting the Airespace 1300s, return

the MAC addresses and their locations on the maps to the network planner or manager. The Airespace

Control System Software (ACS Software) operators will use the MAC address and location information

to create maps for Airespace Operating System management.

Also return any unused mounting kit hardware and external power supplies to the network planner or

manager for use in future deployments.

Note: Make sure the cables are routed away from the Airespace 1300 antennas.

Note: Please remind the Network Planner or Manager that now is a good time to