User's Manual

3/24/05 Step 4: Mounting the Airespace 1300s
90-100xxx-001 6
Step 4: Mounting the Airespace 1300sStep 4: Mounting the Airespace 1300s
Using the supplied or optional Airespace 1300 External Pole Mount kit, mount each Airespace AP in its
indicated location, oriented as shown on the map. Ceiling-Mount Bezel
The Airespace APs can be mounted in one of the following configurations:
• Ceiling/Wall-Mount Base -- Refer to Ceiling/Wall Mount Base.
• Pole Mount Bracket-- Refer to Pole Mount Bracket.
• Exterior Antenna Mount -- Refer to Exterior Antenna Mount.
Ceiling/Wall Mount BaseCeiling/Wall Mount Base
This section TBD
Figure - Assembling the Airespace AP and Ceiling/Wall-Mount Base
• Copy the MAC address(es) from the label(s) on the Airespace AP onto the corresponding
location on the map. MAC addresses have the format 000B85xxxxxx.
• Attach the ceiling-mount base to the bottom of the Airespace AP using the factory-supplied
machine screws and washers.
• Position the ceiling/wall-mount base so its keyhole slots are partly on the drywall, sheet metal,
or other screw heads installed in Step 3: Preparing Mounting Locations
.
• Attach the cables to the sides of the Airespace AP.
• Slide the ceiling-mount base onto the drywall, sheet metal, or other screw heads until it snugs
into place.
You have installed the Airespace AP. Repeat Step 4: Mounting the Airespace 1300s
for each Airespace
AP location, and then continue with Step 5: Returning MAC Information
.
Note: If the screws do not securely hold the ceiling-mount base, remove the
Airespace AP and adjust the screws until they hold the ceiling-mount base securely.
TBD